- Beautiful Wood Framed Display Case
- Dimension approx: Inside 43″ L x 14″ W x 22″ H
- Suitable for models or combination of models up to 58 inches
- Plexiglass is included.
Sure to compliment the decor of your office or living area, our table top display case is constructed of solid hard wood/MDF and is stained with a dark colored lacquer (Actual colors may vary) the sides are made of clear plexiglass. This display case is the best way to protect your ship model from damage or dust and to show off your model. The inside dimension of the display case is 43″ L x 14″ W x 22″ H and it will suitable for 36-42 inches long battle ship, container ship or tanker models.
This item is shipped disassembled, so some assembly is required. This display case does not include model ship (shown) or display stand/table. The model ship, pictured, is shown for reference only.
Easy instruction for assembling display case
You will need a screwdriver and hair dryer
- Install 4 solid wood uprights to the base of the display case with 4 (provided) screws. Do not over tighten the screws during the assembly of the case.
- Remove the protective covering from the plexiglass panels. A hair dryer may me used to warm the protective covering for easier removal.
- Slide the plexiglass along the channels/slots of the wood uprights, from top, donw. If the plexiglass is not easy to go all the way down to the bottom, the screws may be loossened and retightend after the plyglass is in place.
- Align the frame in place and tighten the (provided) screws. Do nto overtighten the screws, but ensure all screws are tightly in place.
- Set your model ship/boat model into the display case and cover the top of the case using the remaining plexiglass panel.
